Sensors with daylight harvesting can turn off fixtures, when the driver on the fixture will cut off the LED current when 0-10v signal drop down to range of 1%-10%. Most of outdoor fixture drivers will cut off LED current at 5% to 7% dimming level. Following are the detailed step-by-step description of the configuration to… Read more Can EFS106 sensors designed for daylight harvesting be used for dusk to dawn operation.
FAQ Tag: Commissioning
How do you find a Bluetooth sensor when not connected directly to a luminaire?
Light level and CCT for luminaires go to different level and CCT when lights turn off via a control function such as “OFF” by non-occupancy or power is interrupted.
Set the dimming level and CCT setting on the Lights setting page and select ‘A’ button on lower right corner to save the settings.
Why does RP0 shutdown when on portable USB battery
RP0 is a signal booster and it requires very little power consumption during when it is powered on, less than 20mA. Some power bank detects the output current and will shut the output off if output current is very small. That was what happened in this case. Please find a power bank that can keep… Read more Why does RP0 shutdown when on portable USB battery